True of False. Write T if the statement is correct, and F if it is not 1. Different kinds of vises can be attached to a workbench. 2. The workbench should be finished with a good varnish. 3. A workbench should be waist high tall. 4. A workbench makes the carpenter's job easy. 5. Workbenches uare always made up of wood. 3​

1. True of False. Write T if the statement is correct, and F if it is not 1. Different kinds of vises can be attached to a workbench. 2. The workbench should be finished with a good varnish. 3. A workbench should be waist high tall. 4. A workbench makes the carpenter's job easy. 5. Workbenches uare always made up of wood. 3​

Answer:

1.true

2.false

3.true

4.true

5.false

_______________

2. workbench needs to be cleaned​

Explanation:

How To Disinfect Cutting Boards And Countertops

Use a Mr. Clean Magic Eraser to remove stuck-on grime or food from the countertop.

Spray a solution of equal parts isopropyl rubbing alcohol and water. This mixture will not harm most surfaces and works as a disinfectant. ...

Wipe down the surface with a microfiber cloth – this is the secret to regaining shine.

3. an object was held at 0.5 meters above a workbench that is 1 meters above the floor.if the potential energy relativeto the workbench and the floor is 22.05 joules.what is the mass of the object​​

Answer:

44.1kg(?) di ko sigurado eh

4. Dr. Zavares tightened the final screw on his contraption. He tossed thewrench on the workbench with a thud. The beakers in the center of the roombubbled with activity. "Computer," he announced to the empty room, "Zavaresneeds a lemonade." A beeping and grinding noise could be heard in the distanceand then a small robot floated into the laboratory with a glass of lemonade on aplatter. Dr. Zavares grabbed the lemonade from off of the platter and drank it. Hethen returned the glass to the floating platter and the robot hovered away. "Well,here goes nothing," Dr. Zavares said to himself as he reached for the power switchon his latest contraption.7. Where is this story taking place?-How do you know?8. When is this story taking place?-How do you know?​Plss help me...

Answer:

WHERE IS THE STORY TAKING PLACE? HOW DO YOU KNOW?

ANSWER:

THE STORY IS TAKING PLACE IN THE LABORATORY OR WORKSTATION. I BELIEVE THIS BECAUSE THERE ARE WORKBENCHES, BUBBLING BEAKERS, AND DR. ZAVARES IS DOING SCIENTIFIC WORK.

WHEN IS THE STORY TAKING PLACE? HOW DO YOU KNOW?

ANSWER:

THIS STORY IS TAKING PLACE IN THE FUTURE BECAUSE THERE IS ADVANCED TECHNOLOGY LIKE FLOATING ROBOTS THAT DO NOT CURRENTLY EXIST.

5. 1. When setting up your own workstation, the first thing to prepare is? a. Chair c. Workbench b. ESD mat d. Tools and equipment 2. Liam’s workstation has components and parts litter all over the bench. What he must do? a. Segregate and put them into part organizer b. Leave things as long as they are in the workbench. c. Put the parts and components in one container d. Ask someone to clean and organize the parts and components 3. What do you call the source of potential damage, harm or adverse health effects on something or someone? a. Risk c. Danger b. Hazard d. Safety 4. Which of the following does not consider as electrical hazard? a. Open wires c. Loaded extension cord b. Wet hands d. Unattended soldering iron 5. It is a material that contains solder pads and holes on it ready for prototyping. a. Breadboard c. Copper clad board b. Universal PCB d. Double sided PCB 6. It is an etching agent that is used to remove copper from the board. a. Ferric Sulfate c. Ferric Chloride b. Ferric Sulfide d. Ferric Phosphate 7. These are tools responsible for boring holes into any materials such as PCB, PVC, chassis, metal and wood. a. Boring tools c. Driving tools b. Splicing tools d. Soldering tools 8. These are tools usually used for holding, bending and cutting wires for connection and termination purposes. a. Boring tools c. Driving tools b. Splicing tools d. Soldering tools 9. This materials is used to smoothen and remove smudges as traces of corrosion during etching process. a. Alcohol c. Sandpaper b. Solder wick d. Ferric Chloride 10. What will you do when you experience mild electric shock due to open wires? a. Immediately call 911 for assistance b. Apply first aid and report to superior c. Scream and disturb the people in the workplace ​

Answer:

pag binasa mo malalaman mo yung sagot try mo

6. Place in workbench to prevent build-up of static electricity."​

Answer:

Static-safe workbenches must be grounded, and a grounding cord is one way to do so. This connects the surface of the workstation to the ground below it, and is best utilized when the grounding cord uses firm fitting connecting devices like metallic crimps, snaps, and banana plugs to link to specific ground points.

Answer:

Static-safe workbenches must be grounded, and a grounding cord is one way to do so. This connects the surface of the workstation to the ground below it, and is best utilized when the grounding cord uses firm fitting connecting devices like metallic crimps, snaps, and banana plugs to link to specific ground points.

Explanation:

HOPE IT'S HELP (≧▽≦)

#CarryOnLearning

7. What kind of tool is a workbench? A. Boring Tool B. Holding Tool C. Scraping Tool D. Driving Tool E. Cutting Tool F. Measuring Tool

E. Cutting Tool

A workbench is a sturdy table at which manual work is done.

hammer, a screwdriver, a corner square, a measuring tape, a few clamps and a framing pencil. You'll also need bolts, nuts, screws, nails and wood glue.

#CarryOnLearning

Answer:

B

Explanation:

A workbench is a table used by woodworkers to HOLD workpieces while they are worked by other tools. There are many styles of woodworking benches, each reflecting the type of work to be done or the craftsman's way of working.

8. 1. It is used to cut wood. blank 2. It is used in cutting materials. blank 3. It measures straight lengths. blank 4. It is used for twisting and cutting wires. blank 5. It is used to drive or remove nails from wood. blank 6. It is used to hold and turn pipes. blank 7. It is used to hold a piece of wood to a workbench. blank 8. It is used for turning screws. blank 9. It is used for boring holes. blank 10. It is used for shaping and smoothening wood. blank Choose the correct answer Scissors Wrench Screw Driver Electric Drill Pliers Clamp Pull Push Ruler Screw driver Saw Hammer Sander

Answer:

1. Saw

2. Scissors

3. Ruler

4. Pliers

5. Hammer

6. Wrench

7. Clamp

8. Screwdriver
9. Electric Drill

10. Sander

Explanation:

9. B Read the story below. Encircle the prepositions and box the prepositional phrase in the story.Once upon a time there lived a very poor shoemaker in a little shop. He made shoes on his workbench. Beforehe went to bed, be puts the leather beside his bed. The next morning, when he woke up he was surprised to see a pairof new shoes on the workbench. A rich women went in the shoemaker's shop. The elves came into the shop by walkingunder the table. The Elves came late at night because they did not want the shoemaker to see them working on theshoes. When the dawn came, they were already out of the shop.One night, the shoemaker decided to find who made the shoes. So he hid behind the curtains. Then be discovers that iwas the eleves, who makes the shoes. So In order to repay them, he ask his wife to sew some clothes for the elves. Theelves were so happy with the clothes. After thatthey went out of the shop and never came back​

Answer:

1.bagong pilipinas

2.bagong mukha..

3.may prinsipyo

4.may Isang

5.salita!

6.kaibigan nyu

7.kabigan ko sya si Inday Sara

8.duterte!

9 oh

10. bagong pilipinas bagong mukha

11.may prinsipyo

12.may Isang

13.salita

14.kabigan nyu

15.kabigan ko sya si

16. bong bong

17.marcos!

18.bong bong

19.marcos!

20.yiee

10. Dr. Zavares tightened the final screw on his contraption. He tossed the wrench on the workbench with a thud. The beakers in the center of the room bubbled with activity. "Computer," he announced to the empty room, "Zavares needs a lemonade." A beeping and grinding noise could be heard in the distance and then a small robot floated into the laboratory with a glass of lemonade on a platter. Dr. Zavares grabbed the lemonade from off of the platter and drank it. He then returned the glass to the floating platter and the robot hovered away. "Well, here goes nothing," Dr. Zavares said to himself as he reached for the power switch on his latest contraption. Where is this story taking place? _____________________________________________________ When is this story taking place? _______________________________________________________Help po​

Answer: i hi hope it helphelp guysssguysguysssguyssslovguysssguysguysssguyssslsslove you guysssguyssslov

Explanation:

11. it is a hand tool shaped like a figure c used for fastening wood together or hold wood on the workbench​

Answer:

A C-clamp or G-clamp or G-cramp is a type of clamp device typically used to hold a wood or metal work piece, and often used in, but are not limited to, carpentry and welding.

12. the normal healthy person will encounter n dangerous voltage, while ng the laboratory activity, circumstances occurs under which a electric shock may be experienced. Surprising shocks, while not ly dangerous in themselves, may cause secondary injury through uscular contraction that can hurl a person against a wall or workbench ly another more dangerous source of current. a precaution used by experienced engineers and technicians. Always hand in your pocket or behind you when measuring current and two hands are in with contact with the circuit, the current flows across and heart regions, which is very dangerous. E, with regard to the wiring of the circuit, ask the teacher to check it out​

Answer:

which of the following is insoluble in water

13. Dr. Zavares tightened the final screw on his contraption. He tossed thewrench on the workbench with a thud. The beulcers in the center of the roombubbled with activity. "Computer," he announced to the empty room, *Zavaresneeds a lemonade. A beeping and grinding noise could be heard in the distanceand then a small robot floated into the laboratory with a glass of lemonade on aplatter. Dr. Zavares grabbed the lemonade from off of the platter and drank it. Hethen returned the glass to the floating platter and the robot hovered away. "Well,here goes nothing." Dr. Zavares said to himself as he reached for the power switchon his latest contraption.7. Where is this story taking place?8. When is this story taking place?​

Answer:

i think it is in the outer space because the robot is floated.

14. It is a holding device attached to a workbench. It has two jaws that hold something in place.

Vise, also spelled Vice, device consisting of two parallel jaws for holding a workpiece; one of the jaws is fixed and the other movable by a screw, a lever, or a cam. When used for holding a workpiece during hand operations, such as filing, hammering, or sawing, the vise may be permanently bolted to a bench.

15. what areas in the kitchen that needs to be cleaned draw a check mark on your chosen answer copy and answer on a sheet of paper example (/) 1 floor of the kitchen _1 floor of the kitchen 2_.workbenches fixed and/or mobile 3_.air conditoning outlets 4_.light covers 5_sinks and food disposal units6dry store7_cool room 8freezer9grease traps 10drains in floors, especially wet areas 11_exhaust fans and filters 12_garbage storage areas 13_ stock receiving areas 14_ staff change room 15_ chemical storage room

Answer:

1.✅

2.❌

3.❌

4.❌

5.✅

6.✅

7.❌

8.✅

9.✅

10.❌

11.❌

12.✅

13.❌

14.❌

15.❌

Explanation:

Yung mga my check po ayun po ang sagot tas yung ekis hindi po iyun ang sagot.

I hope its help

16. Fill in the missing blanks to complete these statements. 1. Movement in the Department should be ____________ and ______________ at all times. 2. The workbench and floor should be kept ___________ and ___________. 3. All tools and materials are to be put away by the end of the lesson. 4. Students are to remain a __________ distance from others Students using machinery.NEED KO NA NGAYON!!Nonsense answer-reportCorrect answer-Brainlestpang 3 ko na tong tanong mga sagot nyo sobrang nonsense​

Answer:

Nasa module lang kasi yan wag ka magpatapang

17. Fill in the missing blanks to complete these statements. 1. _______Movement in the Department should be and at all times. 2.______ The workbench and floor should be kept and 3. ______All tools and materials are to be put away by the end of the lesson. 4._____ Students are to remain a distance from others Students using machinery. Add all your answers in the space provided THEN press next 10. What are 2 reasons why it is important to wear safety glasses at all times in the Workshop in the Design and Technology Department.​

Answer:

thx for points

18. Activity 2. Adjective phrases in definitions Directions: Match the first parts of the definitions on the left with their corresponding distinguishing charactersfics on the right White only the letter. 1. Shovel is a tool A. for woodworking B. in France C. of israel 2. Shequel is the standard monetary unit. 3. Workbench is a bench... 4. A chariot is a two-wheeled vehicle... 5. A choteou is a castle or a large estate. D. of antiquity E. for digging.lifting sond.soil.gravel snow driven by a horse and moving bulk materials such as etc​

Answer:

1. E

2.C

3. A

4. D

5. B

Explanation:

19. 2. A bench for crafting metal-related items.A. cabinet maker's bench C. metal work benchB. carpenter's workbench D. woodworking bench​

Answer:

A. metal work bench

Explanation:

thats my answer

Answer:

d. woodworking bench

I know that

Explanation:

#carryonlearning

please follow

20. 1. Used to measure small quantities ofingredients2. Afat, thin and blunt metal used forleveling-off dry ingredients andspreading icing and frosting on cakes3. Used for greasing baking pans and topsof pastry products4. A wide rectangular utensil used to cutthe dough and to scrape workbenches.5. Used to form and cut biscuits andcookies into various shapes.6. Have many flexible wires. Used forwhipping eggs, and cream7. Used for cooling cakes and other bakedproducts without "steaming" the bottomcrust8. Used to measure the accuracy of heat inthe oven9. Used to flatten dough for bread, biscuitsand pastries10. A general all-purpose spoon for mixingand stirringA Cookie cutterB. Oven thermometerC. Wooden spoonD. Measuring spoonE Pastry bagF. Rolling pinO. Wire whiskH. Straight spatulaLDough cutterJ. Cake Rack/ CoolingRackK. Pastry brushshorter​

Answer:

1.D

2.H

3.K

4.L

5.A

6.O

7.J

8.B

9.F

10.C

21. Arrange the following steps in making a workbench according to its sequence. Number the steps from 1 to 9. ___________ A. Frame it up ___________ B. Design and materials ___________ C. Glue up continues ___________ D. Glue up ___________ E. Finishing ___________ F. Plane it flat ___________ G. Final assembly ___________ H. Laminate it ___________ I. Half laps

Answer:

A.5

B.1

C.4

D.3

E.9

F.2

G.7

H 6

I.8

Explanation:

I'm not sure but hopefully it will help

1234566708164976186474

22. explain the importance of workbench in various carpentry work. ​

Answer:

A workbench is a table used by woodworkers to hold workpieces while they are worked by other tools. There are many styles of woodworking benches, each reflecting the type of work to be done or the craftsman's way of working.

23. PRE-TEST1. The average height of a workbench.A. 19" - 24"C. 30" - 36"B. 25"-29"D. 37"-41"​

Answer:

A. 19"-24"

Explanation:

basta yan na

Answer:

C. 30" - 36"

Explanation:

Most work benches range from 28 inches to 36 inches deep, 48 inches to 96 inches wide and 28 inches to 38 inches tall.

24. GENERAL DIRECTION. Read the directions carefully. Write legibly. NO ERASURES. A. Directions: Write the word TRUE if the statement performs preventive maintenance and the word FALSE if it is not._____ 1. A shovel is used as cutting tool._____ 2. Use proper gears when feeding animals. _____3. Extra care should be taken while using nail guns and power belt sanders._____4. While handling a tool connected to a power source, fingers should be kept away from the on/off switch. _____5. Power tools should be returned to their cabinets after use to prevent them from being used by an unauthorized and incapable person._____6. A lubricant is a substance introduced to lessen friction between moving surfaces._____7. When working with a file, stabilize the blades in a vise or against a solid surface such as a workbench to avoid injury and ensure an even stroke. _____8. Tools that are worn out should be separated and be fixed immediately to avoid an accident._____9. Store tools in a clean dry storage area._____10. Drain oil and gasoline before long-term storage. er from the box.​

1) FALSE

2) TRUE

3) TRUE

4) FALSE

5) TRUE

6) TRUE

7) TRUE

8) TRUE

9) FALSE

10) FALSE

I HOPE THIS HELPS.

25. Cytoplasm 1. I hold all the parts of the cell together as they float on me.2. Everyone do what I say.I am in control.3. I used light energy to make food.4. I break down food to release energy.5. I am stiff, I protect and give shape to plant cells.6. Everything I touch, I destroy. I clean unuseful cell debris.7. I am quite full of water. I am responsible for the crisp appearance ofthe fresh vegetables.8. If you were me, How would you want me? Soft or rough?9. I am the workbench where proteins get manufactured.10. I control what gets out as well as what comes out.11.I am a series of tubes. I transport proteins as well as other things.12. I pack things up for Delivery.​

Answer:

1. cytoplasm

2. nucleus

3. chloroplast

4. mitochondria

5. cell wall

6. lysosomes

7. vacuole

8. endoplasmic reticulum

9. ribosomes

10. Cell membrane

11. rough ER

12. golgi apparatus

26. B. What areas in the kitchen that needs to be cleaned? Pick out the items them in a separate sheet of paper. Example. Number 1. Floor of the kitchen 1. Floor of the kitchen 2. Workbenches fixed and/or mobile 3. Air conditioning outlets 4. Light covers 5. Sinks and food disposal units 6. Dry store 7. Cool room 8. Freezer 9. Grease traps 10. Drains, in floors, especially wet areas 11. Exhaust fans and filters 14. Garbage storage areas 15. Stock receiving areas 16. Storerooms, shelving, floor, walls and ceilings 17. Walls​

Answer:

Floor In The Kitchen

Walls

Drains, Floors especially wet areas

Sinks Food Disposal

Grease Traps

Garbage Storage Area

Freezer

27. Never set a hot soldering iron down directly on your workbench​

Answer:

Keep the cleaning sponge wet during use. To the extent possible, conduct soldering on a solid, level surface and always return the soldering iron to its stand when not in use. Never put it down on your workbench. Be sure the iron is secure in its stand so it cannot inadvertently dislodge onto the work surface.

Explanation:

28. Directions: Arrange the jumbled letters to form the correct word based on the descriptiongiven below. Write the answer on the space provided for.ITRG1. It is the size of abrasive material on the sandpaper.STONEWHET2.A fine-grained stone used to sharpen any cutting tools.PRAHSENINGESIV HCNEB3. It is the process of creating or refining the sharp edgesand appropriate shape of tools.4. It is a holding device attached to a workbench and ithas two jaws to hold work piece firmly in place.5.Oil is an example of organic substance used to reducefriction, heat and wear between mechanicalcomponentsCANTLUBIR​

Answer:

1.Grit

2.Whetsone

3.Sharpening

4.Vise bench

5.Lubricant

Explanation:

#CarryOnLearning

29. rarely used equipments or spare parts should be stored on the workbench/placetrue or false? ​

Answer:

false

hope it helps

explaination:because you just need things that you most use to have some space

30. 12. When you disassemble a computer unit you need to ensure that your workspace should havea good ventilationb. workbench accessible from all sidesc. adequate lightingd. all of the above13. Why do we need to put thermal compound on the CPU during disassembly/assembly of computeunit?a. it makes the CPU works fastb. it keeps the CPU coolc. to keep the CPU secured. to prevent damage14. A storage device that stores billions of characters of data on a removable disk.a. Hard disk driveb. HardwareC.Hostd. Joystick15. Refers to the tangible (things you can touch) components of a computer systema. Hardwareb. BIOSc. Flash drived. Active host16. Contains the CPU, BIOS, memory, mass storage interface, serial port, parallel ports, expansislots, and all the controllers required to control peripheral devices.a. Floppy disk driveb. Motherboardc. Active hubd. Memory17. It processes and renders the graphics output from the computer to the computer display.a. Memoryb. Video cardc. CPUd. Hard disk drive​

Answer:

12. D

13. B

14. A

15. C

16. B

17. B

Explanation: